The non-linear junction detector LORNET-0836 is the indispensable tool for quick and reliable detection of devices containing semiconductor components. It can be used for counter-surveilance search works in premises (covert transmitters identification), as well as for location of explosive devices outdoors. The DPF (double probing frequency) technology with a patent pending antenna system places it truly apart from the competition.
Main competitive advantages:
• Duoble probing frequency operation mode gives significant advantages over single frequency NLJD since it is much better to detect small-sized and high-frequency semiconductor objects at high frequencies whereas the use of low frequencies benefits from improved detection in the wet ground and concrete walls;
• It is possible to operate in one of the frequency ranges and in both of them simultaneously;
• An embedded parabolic antenna with high gain (20 dB at 3600 MHz) enables highly precise detection of semiconductor components from a long distance.
• Laser pinpointing for a space selective object localisation;
• Wide power control range, automatic and manual modes of probing signal level adjustment;
• Possibility to listen to the envelope detector output as well as to the received signal level via a built-in loudspeaker and wireless head phones to evaluate parametric impacts (e.g. knocking) on the suspicious object.
• Low-frequency range (800 MHz) gives opportunity the operate high humidity.
• High frequency range (3600 MHz)gives opportunity to spatially select the semiconductor elements location
• Reliable detection of the SIM-card at a distance of 80 centimeters.
• Compact device, the weight is 1 kg.
• Lornet is equipped with an automatic system of protection against centered jamming by criterion of a minimum noise in the receiver path of the 2nd harmonic.
• Electromagnetic radiation towards the operator is many times less than one setted by the Regulator.
| Technical characteristics: |
| Type of probing signal | - pulse modulated carrier with a duty cycle of 0.4 % (Pulse) - pulse modulated carrier with a duty cycle of 6.0 % (CW) |
| Lower probing signal frequency | 789,5 ... 791,5 MHz |
| Upper probing signal frequency | 3581,5 ... 3607,5 MHz |
| Transmitters peak power in each frequency range in Pulse | 25W in low FR/ 18W in upper FR |
| Transmitters peak power in each frequency range in CW | 6W in both FR |
| Power control range | 20 dB from max value, 11 steps. |
| Transmittance antenna gain of upper range | 20 dB, beam angle by -3 dB level - 22o |
| Transmittance antenna gain of lower range | 6 dB, beam angle by -3 dB level - 60o |
| Receiver antenna gain of upper range | not less 24 dB |
| Receiver antenna gain of lower range | not less 8 dB |
| Receivers sensitivity | better than –110 dBm (one LED lights up at the indicator
scale) |
| Receiving path dynamic range | 30 dB (20 dB – LED indicator range, 10 dB –
attenuator range at receivers input adjusting by ATT button). |
| Time of continuous operation with a Li-Ion battery at the max power: |
|
| - in pulse mode | at least 2.5 h |
| - in CW mode | at least 1.5 h |
| Weight of the device | 1 kg |
| Full set weight in a bag | 4.5 kg |
| Device dimensions, cm | 31x31x28 |
| Bag dimensions, cm | 44x30x35 |
| Operating conditions | - ambient temperature +5…+40oC.
- pressure at least 450mm of mercury |
